- CNC Routers
- >
- Used-Biesse Rover Skill 1536FT-Year 2014 with offload Sweep-sold
Used-Biesse Rover Skill 1536FT-Year 2014 with offload Sweep-sold
BIESSE "SKILL 1536 G FT" CNC
2014 Machine
Machine still under power and available for inspection
Biesse Rover model Skill 1536 G FT 2012 wired 230V with two Busch vacuum pumps AND unload of material.
Skill 1536 G FT (5’x12’) - Numerically Controlled Machining Center
Automatic centralized lubrication system
Controls on remote keyboard
Working fields:
3765mm x 1585mm (148” x 62.4”);
Z-axis clearance = 170mm (6.7”) - (120 with Sweeper Arm)
Axes strokes:
X = 4580 mm; Y = 2014,5 mm; Z = 324 mm
A = 3765mm (148”) - MAX = 1560mm (61.4”)
FT worktable dimensions: X = 3765 mm; Y = 1560 mm
Division of the vacuum system into 2 work areas and 2 locking areas in X (pendulum machining)
Upgrade to Division of the FT work table in 9 independent NC controlled areas.
300 m3/h rotary claw vacuum pumps Qty. 2
Pieces unloading system
12 kW (16.1 HP) Electrospindle with HSK-F63 adaptor, air cooled
Flange for The Assembly Of Aggregates On An Electrospindle
Prearrangement for the assembly of a 360° operating unit (C Axes)
Air Nozzle
Revolving tool changer with 12 places
Tool Length Presetter for tools up to 130mm diameter
Boring head BH10
10 independent vertical spindles for single and multiple borings on upper panel surface.
The spindles have an alternate Rh/Lh rotation and move by means of precision ground helical gears which grant maximum operating accuracy.
The head is composed of:
10 independent vertical spindles at a centerdistance of 32 mm, 7 of which are placed along X and 3 along Y;
Autotransformer for voltages different from 380/400/415 V - 50/60 Hz
NON EC safety devices including 1 safety mat and low fence .
BiesseWorks Advanced (machine version).
BIESSEWORKS - Advanced programming system - office version
BIESSENEST MODULE
The machine has no issues. We upgraded for reasons outside of the physical Router itself (some seen in the videos).Machine is powered and can be viewed @ anytime. Tooling is not included with sale of machine.Outfeed table is included.
(2) Busch vacuum pumps
Machine delivered around Christmas of 2012.
Spindle was rebuilt 9/2017
PC replaced April/2015 due to crash
BiesseWorks Editor Ver 3.4.22.2192 currently on machine
FOB: KS, AS is Where is.
Condition: Very Good, under power and in production
Avail for Inspection, Installation avail. upon Request-Click
Loaded onto Truck
VIDEO LINKS:
https://youtu.be/jao3rwtvzME?si=9DAKqeA91NBJZm6F
Technical Data
- Electrical: 60 Hz – 3 Phases Machine+ 2 10Hp pumps-39 kVA
- Compressed Air:
- Pressure 7.5 bar (105 PSI)
- Air consumption 400 NL/Min (14 CFM)
- Dust collection
- Dust extraction sockets diameter: (B) 200mm; (B’) 250mm
- Air velocity: (B) 92 fps; (B’) 92 fps; (B’’) 40 fps; (B’’’) 40 fps
- Static Pressure: 2200 Pa (9 inch water)
- Dust extraction consumption while cutting (B port): 3200 m3/h (2000 cfm)
Dust extraction consumption load/unload cycle (B’): 3600 m3/h (2500 cfm)