- Solid Wood
- >
- Sanders
- >
- Brush Sander
- >
- Used-CD2-300 moulding sander-Year 2012-SOLD
Used-CD2-300 moulding sander-Year 2012-SOLD
SKU:
CD2-300
$19,500.00
$9,999.00
$9,999.00
Unavailable
per item
CD2’s are designed to thoroughly and uniformly finish sand and sealer sand work pieces such as mouldings, trim and flooring.
The QuickWood CD2 Series Moulding sanders have two or more horizontal top spindles and can have two or more vertical side spindles and/or two or more horizontal bottom spindles to sand the various surfaces of the work pieces as needed.
All spindles are adjustable for different product sizes as well as abrasive wear. The top and side spindles are tilt-able for optimum sanding.
Full width pressure rollers easily adjust by hand crank to hold the work pieces firmly on the power roller conveyor and against the guide fence.
This configuration is the perfect fit molding sander for the medium to small operation. These machines have it all!
It has variable speed on the driven rollers, running 10-50 feet per minute.
It has 4 hold-down pressure rollers from the top, holding the moulding firmly in place while it travels though the machine.
Each spindle has variable speed to change the sanding on the moulding for less sanding in sealer and primer coats to more sanding on raw wood.
These machines will remove light knife marks and prep the wood for staining and sealing without being detrimental to the profiles and contours of your work pieces.
http://www.quickwood.com/moulding-sander-quickwood/moulding-sander/
FOB: MO AS is Where is.
Loaded on Truck
Arranged 460V/3ph
Condition: Very Good working Order
Brochure Link
Video Link-Click
The QuickWood CD2 Series Moulding sanders have two or more horizontal top spindles and can have two or more vertical side spindles and/or two or more horizontal bottom spindles to sand the various surfaces of the work pieces as needed.
All spindles are adjustable for different product sizes as well as abrasive wear. The top and side spindles are tilt-able for optimum sanding.
Full width pressure rollers easily adjust by hand crank to hold the work pieces firmly on the power roller conveyor and against the guide fence.
This configuration is the perfect fit molding sander for the medium to small operation. These machines have it all!
It has variable speed on the driven rollers, running 10-50 feet per minute.
It has 4 hold-down pressure rollers from the top, holding the moulding firmly in place while it travels though the machine.
Each spindle has variable speed to change the sanding on the moulding for less sanding in sealer and primer coats to more sanding on raw wood.
These machines will remove light knife marks and prep the wood for staining and sealing without being detrimental to the profiles and contours of your work pieces.
http://www.quickwood.com/moulding-sander-quickwood/moulding-sander/
FOB: MO AS is Where is.
Loaded on Truck
Arranged 460V/3ph
Condition: Very Good working Order
Brochure Link
Video Link-Click
Sold Out