USED Grizzly G0638 - 10 HP 3-Phase Cyclone Dust Collector
Our largest Cyclone Dust Collector features a whopping 4029 CFM capacity and can handle any large duct system with a static pressure loss less than 16.8". Dual collection drums minimize the downtime when emptying dust and chips, and the noise-reducing exhaust mufflers keep the noise level below 90 dB. The ramped air intake is so efficient, there is very little fine dust that makes it to the plastic filter bags—and with a 99.9% filter efficiency rating, essentially no dust escapes. The perfect choice for large shops with multiple woodworking machines operating at the same time, all day long. CSA certified meeting CSA C22.2 #71.2-08 and UL 987-7 standards!
Specifications:
- Motor: 10 HP, 220V/440V*, 3-phase, 30A/15A, TEFC Class “F”
- Intake hole size: 12"
- Filter surface area: 398 sq. ft
- Cartridge filter diameter: 19-11/16" x 2
- Impeller size: 18-1/2" steel radial fin
- Air suction capacity: 4029 CFM @ 4.3" SP
- Maximum static pressure (inches of water): 16.8"
- Sound level: 87-90 dB
- Filter: Spun bond polyester, 99.9% efficiency from 0.2-2 microns
- Collection drums: Steel, 55 gallon x 2
- Overall dimensions: 76-3/4" L x 60" W x 139-3/8" H
- Stand: 13 gauge steel
- Cyclone body: 16 gauge steel
- Blower housing: 11 gauge steel
- Approx. shipping weight: 937 lbs.
- Additional Info-Click
- FOB: MO
- SOLD AS IS WHERE IS
- LOADED ON A TRUCK
FAS-LX: 6" Universal Arch Moulder
The FAS-LX 6" Universal Arch Moulder is equipped with two axis spindle adjustment, and spindle tilt in order to easily and accurately match the cutter to the moulding profile. The spindle adjustment and floating feed simplify the cutting of circular/elliptical profiles, straight casing, and crowns.
- Very affordable
- Very versatile
- Very durable
- Floating feed system
- 52° spindle tilt
Machine Details
- 6" max. cutting width
- 7.5 HP motor
- Variable feed speed
- Optional straight moulding feeder
- Weight: 1475 lb
- Additional Info-Click
- FOB: MO
- SOLD AS IS WHERE IS
- LOADED ON A TRUCK
FELDER C3-31 ALL IN ONE WOODSHOP-YR2012
A complete woodworking setup in one machine
Made in Austria to a quality that cant be beaten!
Full combination machine Hammer C3-31 with Comfort package
A complete woodworking setup in one machine
Made in Austria to a quality that cant be beaten!
NOW ALSO AVAILABLE WITH SILENT POWER SPIRAL CUTTER
3 motors 4.0 HP (3kw) single phase or three phase power
Saw unit with 103mm cutting height
Planing/ Thicknessing width 310 mm,
Planer table length 1400 mm,
3 knife quick-change self-setting cutter block system, optional spiral head)
Saw blade tilt 90°–45°,
4 Speed spindle moulder with 30mm shart
Sliding table 2000 mm
Crosscut fence 1300 mm,
Solid cast iron tables and units, Forward and reverse run on spindle.
The specifications are as follows:
Planer:
Maximum depth of cut in mm 4 mm
Surface planing width in mm 310 mm
Surface planer table length in mm 1400 mm
Planer fence tilting from 90°–45°, anodised
Thicknesser:
Thicknessing planing width in mm 306 mm
Thicknessing height min. – max. 4–225 mm
Synchronized feeder drive 6 m/min
Saw Unit:
Main saw blade dia. 250–315 mm, Saw unit speed 4800 rpm
Saw blade tilting from 90°–45°, Max. cutting height 103 mm
Saw-spindle moulder table in mm 860 x 300 mm
Rip capacity continuously adjustable 800 mm 0–600 mm
- FOB: MO
- SOLD AS IS WHERE IS
- LOADED ON A TRUCK
Used Accu-Systems HPJ DRILL AND DOWEL-96" (Pillar)-HPJ-11-96-2013
96" HPJ Boring, Gluing and Dowel Inserting System
Horizontal and for cabinetry and furniture manufacture of boxes, drawers, face frames and other components
CNC contoller for the X axis gives accurate positioning and ease of use with a 15" touchscreen color monitor.
Digital mechanical readouts for height and depth
Pendulum loading with 4 zones allowing the machine to process one part while the other part is being loaded. Clamps maintain pressure on multiple parts while in process.
3 Horsepower High Frequency direct driven motor produces 24,000 RPM on the router spindle.
Additional Drill Unit
1" Thick machined aluminum work surface is covered in 3M non-slip maintenance-free protective cover
Sealed glue injection system gives continuous use without constant flushing and clean-up
Can use Glue or Water
Condition: Very Good, still under power and in production
FOB: MO, AS is Where is.
Rigging Charge-$1500.00
Installation Avail. upon Request.
Used-Thermwood Model C-53 2007
Brand: Thermwood-New UPDATEDController in 2011
Approx. Shipping Weight: 10,000 Lbs.
Approx. Shipping Dimensions: 8' W x 20' L x 7' H
Specifications:
Table: 5' x 10' Nested Base
Controller: Thermwood SuperControl
Spindle: 25HP HSD
Tool Changer: Automatic 7 Position Bar Style
Power Requirements: 480 V 3 Phase
Equipped With:
18HP Vacuum Pump,Assorted Tool Holders, Manuals
FOB: MO, AS is Where is.
Condition: Very Good, under power.
Avail for Inspection, Installation avail. upon Request-Click
Rigging Charge-$1,800.00
USED EVANS 62" PINCH ROLLER MODEL 0257
- NEW Top and Bottom Rollers
- Feed Rate: 50’ FPM
- Maximum Width: 62”
- Maximum Thickness: 2”
- Work Height: 30-1/2” (Optional Riser Available)
- Drive Motor: 1/2 HP
- Electrical: 120 V, 1 PH,
- 60 Hz (Options Available)
- Air Requirement: 100 PSI
- FOB: MO
- SOLD AS IS WHERE IS
- LOADED ON A TRUCK
USED LAUDERDALE HAMILTON SCISSOR LIFT-4500LBS
36 X 72" X 4500LBS
FOB: MO
LOADED ON TRUCK
CONDITION: EXCELLENT
Used Holzher Sprint 1327 Classic Edgebander-2012 year
UsedHolz-Her Sprint Edgebander 1327
165 hours operating hours
Edge thickness min./max. 0.4 - 8 mm (0.016 - 0.315"), coiled material 0.4 - 3 mm (0.016 - 0.157"); Panel thickness 6 - 60 mm (0.236 - 2.362"), workpiece width min. of 65 mm (2.559"); workpiece length min. 160 mm (6.299"); Feed speed 10 - 18 MPM (33 - 59 FPM).
Flat Screen with color graphics interphase, programs can be easily created and recalled at will; Graphic interface makes programming easy, icon of each unit may be brought up on the screen to show the operator the status of the unit and the parameters which can be programmed; Edgebander can be operated manually when required, without necessity to write a program.
Machine In-Feed Configuration:
Pre-Milling Station "1802": (2) 2.0 KW (2.68 HP) - 12,000 RPM motors, edge Magazine "1901": for coil and strip processing, utilizing motion detector to ensure accurate, trouble-free positioning of edge material; exclusive "Tractor-Belt feed System", edge guide equipped with automatic guillotine lock-out for safety, 3° approach angle allows easy feeding of solid wood edges.
Pressure Section "1913": Servo controlled pressure section with (1) large driven roller and (2) cantered idle rollers, Gluing sytem "GJ 301".
End Trimming Unit "1918": Front & rear 2 x 0.35 KW (0.5 HP) - 9,000 RPM motor each, uni-point swivel-axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel),"PCS" programmable pneumatic change-over from flush to bevel.
Flush/Bevel/Radius Combination Trimming Unit "1826": Servo controlled, 2 @ servo motors (1) for horizontal copy wheel & (1) for tool spindle position) programmable top & bottom unit 2 x 0.65 KW (0.87 HP) - 9,000 RPM each motor. Uni-Point design with no second adjustment, pneumatic, programmable tilt action for changing the degree of bevel, digital counters for vertical copy wheel position and pneumatic air cylinder for in/out pre-positioning of trimming motor.
Corner Rounding Unit "1832": (1) Motor 0.22 KW (0.30 HP) - 9000 RPM for up to 3 mm edge thickness and work-piece thickness min./max. 12 - 45 mm (0.473 - 1.772"), max. feed speed 10 MPM (33 FMP).
Profile Scraping Unit "1929": Top/Bottom servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives, equipped with air-jet blowers and chip collector box.
Glue Scraping Unit "1964": Flat, top/bottom, ball bearing guided and pneumatic controlled.
Buffing Station "1940": Top & bottom buffing motors with 150 mm ( 6.0") cloth buffing wheel diameter, adjusts in any direction (vertical tilt is 0° - 5°, horizontal swivel is 0° - 20°); 1,440 RPM wheel rotation.
FOB: STL
Arranged 230, 3phase, 60hz
Rigging Charge-$1,500.00
Condition: Excellent, As Is, Where Is.
USED FELDER ForKa 200 ECO plus CONTOUR BANDER
- Processing of ABS, PVC and wooden edge material
- Depending on the edgeband material being processed, a minimum inner radius of up to 25 mm is possible
- Scale setting for the edge material thickness
- Quick operational readiness ensured by the quick heating gluepot
- Flexibility as a result of using glue granulate
- Fine adjustable glue application
Edge thickness
0,4 - 3,0 mm Edge height
10,00 - 60,00 mm Inner radius
25,00 mm Glue-pot
FOB: STL
Arranged 110v, 1phase, 60hz
Condition: Excellent, As Is, Where Is.
Used Cehisa Edgebander ep-7
Adwood/Cehisa
1
Automatic Edge Feed Station-Coiled up to 3mm and Strip up to 6mm 3/16”
2
Gluing unit
3
Pressure Section- 1 Large Roller, and 1 Idle Rollers,
4
End Trimming unit-
5
Top and Bottom Fine Trimming unit (JC5) with pneumatic exclusion, Flush, Bevel 0~20deg
6
Buffing unit-(PC9)-2 x .12kw Motors 1650rpm Tilting Horz/Vertical
FOB: MO
Arranged 230, 3phase, 60hz
Condition: Very Good, As Is, Where Is.
Loaded onto Truck
Delivery, Installation, and Training are available upon request.